The SCT model is a hybrid between the popular classic set neck and bolt on neck singlecut guitar shapes. The SCT features a T-style top control rout. You have the choice of wood, orientation, neck pocket rout, pickup routs and pre-drilled bridge.
THE BODIES ARE MADE TO ORDER AND WILL SHIP IN APPROXIMATELY 3-4 WEEKS AFTER BEING PURCHASED.
AFTER THE WOOD SELECTION IS MADE AND THE ITEM IS ADDED TO CART, THE REMAINING AVAILABLE OPTIONS ARE SELECTED.
The wood options are 2 piece poplar, 2 piece alder, 2 piece mahogany, 2 piece swamp ash or 2 piece mahogany with a curly maple top. The bodies are joined at the center. For bodies with curly maple tops, the amount of flame and flame pattern varies. Poplar bodies typically have green/purple/gray streaking.
The orientation options are right handed or left handed.
The neck pocket routing options are for a T-style neck or S-style neck.
The pickup routing options are as follows: None, JM-style, P90, Humbucker, Mini Humbucker, Wide Range Humbucker, Filtertron, T-Style or S-Style.
The pre-drilled bridge options are as follows: None, Vintage style wraparound bridge, Gotoh 510 UBC wraparound bridge, ABR-1 tune-o-matic bridge with stop tailpiece, Nashville tune-o-matic bridge with stop tailpiece, Vintage T-style bridge, Vintage 1/2 T-style bridge, Vintage S-style hardtail bridge, Gotoh hardtail bridge, Fender American hardtail bridge, Hipshot hardtail bridge (41060B) or JM-style bridge and tremolo.
For bodies that are drilled for a vintage style wraparound bridge, the post spacing is 3.25" and is designed for .444" anchors. For bodies that are drilled for an ABR-1 or Nashville tune-o-matic bridge and stop tailpiece, the post spacing for the ABR-1 and Nashville tune-o-matic bridge is 2 29/32", and the post spacing for the stop tailpiece is 3.25" and is designed for .444" anchors.
For bodies that are drilled for a T-style bridge or a hardtail bridge, the string through/string ferrule holes are also drilled. The string ferrule holes are pre-drilled for 3/8" flush mount string ferrules.
The bodies are 25.5" scale. For bodies drilled for a wraparound bridge or a tune-o-matic bridge with stop tailpiece, the neck pockets are angled to allow for proper action.
The bodies are drilled for a 7/8" standard T-style jack.
The bodies are sanded to 150 grit, so final sanding up to 220 grit will be required.