TFB Model

DSC_0039.JPG
DSC_0040.JPG
DSC_0039.JPG
DSC_0040.JPG

TFB Model

from 105.00

The TFB model is a hybrid of the original bolt on single cut and the famous vintage neck through guitar featuring a raised center. The TFB model features a T-style top control rout. You have the choice of wood, orientation, neck pocket rout, pickup routs and pre-drilled bridge.

THE BODIES ARE MADE TO ORDER AND WILL SHIP IN APPROXIMATELY 3-4 WEEKS AFTER BEING PURCHASED.

AFTER THE WOOD SELECTION IS MADE AND THE ITEM IS ADDED TO CART, THE REMAINING AVAILABLE OPTIONS ARE SELECTED. 

Wood Type:
Quantity:
Add To Cart

The wood options are 2 piece poplar, 2 piece alder, 2 piece mahogany or 2 piece swamp ash. The bodies are joined at the center. Poplar bodies typically have green/purple/gray streaking. 

The orientation options are right handed or left handed.  

The neck pocket routing options are for a T-style neck or S-style neck.

The pickup routing options are as follows: None, JM-style, P90, Humbucker, Mini Humbucker, Wide Range Humbucker, Filtertron, T-Style or S-Style.

The pre-drilled bridge options are as follows: None, Vintage style wraparound bridge, Gotoh 510 UBC wraparound bridge, ABR-1 tune-o-matic bridge with stop tailpiece, Nashville tune-o-matic bridge with stop tailpiece, Vintage T-style bridge, Vintage 1/2 T-style bridge, Vintage S-style hardtail bridge, Gotoh hardtail bridge, Fender American hardtail bridge, Hipshot hardtail bridge (41060B) or JM-style bridge and tremolo.

For bodies that are drilled for a vintage style wraparound bridge, the post spacing is 3.25" and is designed for .444" anchors. For bodies that are drilled for an ABR-1 or Nashville tune-o-matic bridge and stop tailpiece, the post spacing for the ABR-1 and Nashville tune-o-matic bridge is 2 29/32", and the post spacing for the stop tailpiece is 3.25" and is designed for .444" anchors.

For bodies that are drilled for a T-style bridge or a hardtail bridge, the string through/string ferrule holes are also drilled. The string ferrule holes are pre-drilled for 3/8" flush mount string ferrules.    

The bodies are 25.5" scale. For bodies drilled for a wraparound bridge or a tune-o-matic bridge with stop tailpiece, the neck pockets are angled to allow for proper action.

The bodies are drilled for a 7/8" standard T-style jack.

The bodies are sanded to 150 grit, so final sanding up to 220 grit will be required.